> On/Off status
The data package uploaded by the device contains ACC ON/OFF information.
> Fault Indicator
When the automobile is started, the data package uploaded by the OBD contains the status of the fault indicator.
Automobile VIN, CID
After the automobile is started, the OBD can read and upload the VIN code and engine CID of the mobile.
> Standard OBD fault code
After the automobile is started, the OBD can check the automobile status automatically and report the P (power system), C (chassis system), B (body system), or U (signal system) series fault codes.
> OBD standard data traffic
After the automobile is started, the OBD can automatically report the standard OBD data traffic, including revolving speed of the engine, speed, battery voltage, remaining oil, temperature, atmospheric pressure, and the corrected value of the long-term oil consumption.
> Mobile checkup
The 3-D triaxial acceleration sensor can perceive the motion status, such as moving and automobile crash.
Tracking and positioning
After the OBD issues commands, the devices can return the latitude and longitude information immediately.
> Timing tracking
After the OBD issues commands, the devices can return the latitude and longitude information in accordance with the set interval.
> Spacing tracking
After the OBD issues commands, the devices can return the latitude and longitude information in accordance with the set distance.
> Intelligent tracking
After the OBD issues commands, the devices calculates the position based on the time, distance, and steering angle and then sends a positioning record to the application. These algorithms will reduce the data volume sent to the application as possible and ensure the high precision of route playback.
> On/Off status alarm
When the automobile is started or stopped, the OBD will report the on/off even.
> Power cut alarm
The OBD contains built-in backup battery. When the power is cut for the OBD, the OBD enables the backup battery and reports power cut.
> Low battery voltage alarm
When the OBD detects that the voltage of the battery is lower than the threshold, it triggers low battery voltage alarm.
> Long-time positioning alarm
The OBD will trigger a long-time positioning alarm if the device does not perform positioning for long time.
> Idle engine alarm
The OBD will report a idle engine alarm when the automobile is idle for long time.
> Towing alarm
The OBD will trigger a towing alarm when it detects moving thought the automobile has not been started.
> Crashing alarm
The OBD triggers a crash alarm when it detects crash during running.
> Fault alarm
When some part in the OBD is damaged, the OBD triggers a fault alarm.
Remote upgrade and maintenance
Supports remote wireless upgrade, set and read communication parameters (e.g., my number, IP, port, APN, SMS platform, SMSC number) and working parameters (OBD version, speeding set, interval for timing tracking, distance for spacing tracking, etc) through GSM/GPRS.
The OBD can communicate with others through GSM/GPRS.
> Supplementary report for blind area
When the automobile goes some place without GSM signal, the OBD collects data and reports to the center after the connection is restored.
> Smart energy-saving mode
After the automobile is stopped, the OBD can detect the off status and enter energy saving mode automatically. When the automobile is started, the OBD will wake up to working mode again.
> Mileage statistics
The data package uploaded by the OBD contains mileage statistics information.
> Oil consumption statistics
The OBD can automatically collect statistics on the oil consumption and analyze the oil consumption for per hundred kilometers, instantaneous oil consumption, average daily and monthly oil consumption.
Dimension: 43 mm x 46 mm x 27 mm
Weight: 55 g
> Standard OBD interface, accessible for most automobiles
> Plug-and-play, easy to be installed
> GPS receiver with high sensitivity
> GSM/GPRS communication modules with industrial-level stability
> Remote upgrade and maintenance to reduce the device maintenance cost
Operating voltage: 9 V to 30 V
Backup battery: 180 mAH
Normal operating current: <60 mA@12V
Operating current in sleep mode: <30 mA@12V
Operating temperature: -20℃ to +75℃
Storage temperature: -40℃ to +80℃
Relative Humility: 5% to 95% (Non-condensing)
GPS positioning accuracy: <15 m
GPS cold start period (open area): <55 seconds
GPS hot start period: < 5 seconds